Dell XPS 15 (9530, Late 2013) - Manual (Page 38)

38 | Replacing the Power-Adapter Port
Replacing the Power-Adapter Port
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before Working Inside
Your Computer" on page 7. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 9.
For more safety best practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1 Align the screw hole on the power-adapter port with the screw hole on the palm-rest
assembly.
2 Replace the screw that secures the power-adapter port to the palm-rest assembly.
3 Route the power-adapter port cable under the display hinge.
4 Connect the touch-panel cable to the system board.
5 Connect power-adapter port cable to the system board.
Postrequisites
1 Replace the battery. See "Replacing the Battery" on page 17.
2 Replace the base-cover assembly. See "Replacing the Base-Cover Assembly" on
page 12.