Dell XPS 15 (9530, Late 2013) - Manual (Page 37)

Removing the Power-Adapter Port | 37
Removing the Power-Adapter Port
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before Working Inside
Your Computer" on page 7. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 9.
For more safety best practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Prerequisites
1 Remove the base-cover assembly. See "Removing the Base-Cover Assembly" on
page 10.
2 Remove the battery. See "Removing the Battery" on page 16.
Procedure
1 Disconnect the power-adapter port cable from the system board.
2 Disconnect the touch-panel cable from the system board.
3 Release the power-adapter port cable from under the display hinge.
4 Remove the screw that secures the power-adapter port to the palm-rest assembly.
5 Lift the power-adapter port off the palm-rest assembly.
1 power-adapter port cable 2 screw
3 power-adapter port 4 touch-panel cable
1
2
3
4