Dell XPS 15 (9530, Late 2013) - Manual (Page 32)

32 | Replacing the mSATA Card
Replacing the mSATA Card
WARNING: Before working inside your computer, read the safety information
that shipped with your computer and follow the steps in "Before Working Inside
Your Computer" on page 7. After working inside your computer, follow the
instructions in "After Working Inside Your Computer" on page 9.
For more safety best practices, see the Regulatory Compliance home page at
dell.com/regulatory_compliance.
Procedure
1 Align the notch on the mSATA card with the tab on the mSATA-card connector.
2 Insert the mSATA card into the mSATA-card connector.
3 Align the screw hole on the mSATA card with the screw hole on the palm-rest
assembly.
4 Replace the screw that secures the mSATA card to the palm-rest assembly.
5 Connect the I/O-board cable to the system board and I/O board.
Postrequisites
1 Replace the battery. See "Replacing the Battery" on page 17.
2 Replace the base-cover assembly. See "Replacing the Base-Cover Assembly" on
page 12.