Dell S510 Interactive Projector - Manual (Page 115)

Using Your Projector 115
Wireless Setup
• Choose Enable to set up the Region, SSID, SSID Broadcast,
Frequency Band, Channel, Encryption, Key and TX mode channel.
Choose Disable to disable the wireless set up.
SSID: Up to maximum length of 32 characters.
Encryption: You can disable WPA key or select one of 64-bit or 128-
bit in ASCII or HEX string.
Key: If Encryption is enabled, you have to set key value according to
the Encryption mode you selected.
RADIUS Server Setup
• Set up the IP address, Port, and Key information.
GateKeeper
• There are three options:
All Pass: Allow users to access the office network via the wireless
projector.
All Block: Block users from accessing the office network via the
wireless projector.
Internet Only: Block users from the office network, but still reserve
Internet connection capability.
Set Security For SNMP
• Setup Write Community information.
Click the Apply button to save and apply changes. The projector must be
restarted for the changes to take effect.