Dell S510 Interactive Projector User Manual
Page 44
44
Using Your Projector
A
SPECT
R
ATIO
—Allows you to select the aspect ratio to adjust how the
image appears. Options are: Origin, 16:10, and 4:3.
•Origin — Select Origin to maintain the aspect ratio of the image
projector according to the input source.
•16:10 — The input source scales to fit the width of the screen to
project a 16:10 screen image.
•4:3 — The input source scales to fit the screen and projects a 4:3
image.
Z
OOM
—Press
and
to zoom and view the image.
Adjust the image scale by pressing
or
and press
to view on your remote
control only.
Z
OOM
N
AVIGATION
—
Press
to activate the
Zoom Navigation menu.
Use
to navigate the projection
screen.
3D F
ORMAT
—Allows you to select the 3D format. Options are: Side By
Side, Side By Side Full, Top/Bottom, and Top/Bottom Full.
3D S
YNC
I
NVERT
—If you see a discrete or overlapping image while
wearing DLP 3D goggles, you may need to execute 'Invert' to get
best match of left/right image sequence to get the correct image.
(For DLP 3D goggles)
NOTE:
1
When you want to create a 3D experience, you will need a
few other components including:
a
"Active" 3D glasses with DLP Link™.
b
3D content. See "Note 2".
c
3D Player.
2
HDMI 1.4a 3D support and refresh rate are as below:
a
1280x720p@50 Hz Frame Packing
b
[email protected]/60 Hz Frame Packing
c
[email protected]/24 Hz Frame Packing
d
1920x1080i@50 Hz Side by Side Half
e
[email protected]/60 Hz Side by Side Half
f
1280x720p@50 Hz Top and Bottom