Dell S510 Interactive Projector - Manual (Page 126)

126 Using Your Projector
User Password
Select the Enabled check box to require a password to open the operation
window on the computer.
4 DHCP Select the Enabled check box to use DHCP.
You cannot enter an IP address if DHCP is
enabled.
5 IP Address Enter the IP address to assign to the currently
connected projector.
6 Subnet Mask Enter a subnet mask for the currently
connected projector.
7 Default Gateway Enter the gateway address for the currently
connected projector.
8 DNS Server Enter the DNS server IP address for the
currently connected projector.
9 Send Click this button to confirm the changes made
to the projector.
Item Description
1 New Password Enter the new password when changing the
password to open the operation window. (Up
to 26 single-byte alphanumerical characters)
2 Confirm Enter the same password as you entered in
New Password. If the passwords are not the
same, an error is displayed.
3 Send Click this button to confirm the changes made
to the User Password.
Item Description