Dell XPS 400/Dimension 9150 - Manual (Page 121)

Appendix
121
Clearing Forgotten Passwords
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions in the
Product Information Guide.
1 Follow the procedures in "Before You Begin" on page 63.
2 Locate the 3-pin password jumper (PSWD) on the system board (see page 71), and attach the
jumper plug to pins 2 and 3 to clear the password.
NOTE:
When you receive your computer, the jumper plug is attached to pins 1 and 2.
3 Close the computer cover (see page 107).
4 Connect your computer and monitor to electrical outlets, and turn them on.
5 After the Microsoft
®
Windows
®
desktop appears on your computer, shut down the computer
(see page 63).
6 Turn off the monitor and disconnect it from the electrical outlet.
7 Disconnect the computer power cable from the electrical outlet, and press the power button
to ground the system board.
8 Open the computer cover (see page 68).
9 Locate the 3-pin password jumper (PSWD) on the system board (see page 71) and attach the
jumper to pins 1 and 2 to reenable the password feature.
RTCRST
3 2 1
PSWD
3 2 1
WD741bk2.book Page 121 Thursday, July 20, 2006 10:44 AM