Dell XPS 400/Dimension 9150 User Manual
Page 55
Troubleshooting Tools
55
A possible expansion card failure has
occurred.
1
Determine if a conflict exists by
removing a card (not a graphics card)
and restarting the computer (see
page 76).
2
If the problem persists, reinstall the
card that you removed, remove a
different card, and then restart the
computer.
3
Repeat this process for each card. If the
computer starts normally, troubleshoot
the last card removed from the
computer for resource conflicts (see
page 59).
4
If the problem persists, contact Dell
(see page 126).
The system is operating in the quick
resume mode. See "Using Intel
Quick Resume Technology (Optional)"
on page 36 for additional information.
• Press the power button
• Move the mouse
• Press any key on the keyboard
• Press any key on the optional MCE
remote control
Another failure has occurred.
• Ensure that the cables are properly
connected to the system board from
the hard drive, CD drive, and DVD
drive (see page 71).
• If there is an error message on your
screen identifying a problem with a
device (such as the floppy drive or hard
drive), check the device to ensure that
it is functioning properly.
• The operating system is attempting to
boot from a device (such as the floppy
drive or hard drive); check system
setup (see page 113) to make sure the
boot sequence is correct for the devices
installed on your computer.
• If the problem persists, contact Dell
All four diagnostic lights display solid
green and then turn off after the system
successfully boots to the operating
system.
None.
Light Pattern
Problem Description
Suggested Resolution
WD741bk2.book Page 55 Thursday, July 20, 2006 10:44 AM