Dell XPS 400/Dimension 9150 User Manual
Page 75
Advertising
Removing and Installing Parts
75
5 Align the notch on the bottom of the module with the crossbar in the connector.
NOTICE:
To avoid damage to the memory module, press the module straight down into the connector
while you apply equal force to each end of the module.
6 Insert the module into the connector until the module snaps into position.
If you insert the module correctly, the securing clips snap into the cutouts at each end of the
module.
7 Close the computer cover.
notches
memory module
cutouts (2)
crossbars
notch
memory module
cutouts (2)
crossbar
notches
memory module
cutouts (2)
crossbars
WD741bk2.book Page 75 Thursday, July 20, 2006 10:44 AM
Advertising