Printing a network setup page – Dell V515w All In One Wireless Inkjet Printer User Manual

Page 81

Advertising
background image

Every device on the wireless network must use the same WPA passphrase. WPA security is an option only on
infrastructure networks with wireless access points and network cards that support WPA. Most newer wireless
network equipment also offers WPA2 security as an option.

Note: If your network uses WPA or WPA2 security, then select WPA Personal when you are prompted to select the
type of security your network uses.

Printing a network setup page

A network setup page lists the configuration settings of the printer, including the IP address and MAC address of the
printer.

1

Load plain paper.

2

From the printer control panel, press

.

3

Press the arrow buttons to scroll to Network Setup, and then press

.

Print Network Setup Page

appears.

4

Press

to print the network setup page.

Information you will need to set up the printer on a wireless

network

To set up the printer for wireless printing, you need to know:

The name of your wireless network. This is also known as the Service Set Identifier (SSID).

If encryption was used to secure your network.

The security key (either a WEP key or WPA passphrase) that allows other devices to communicate on the network
if encryption was used to secure your network.

You can locate your network WEP key or WPA passphrase by accessing your wireless access point or router and
checking the security information.

If your wireless access point (wireless router) is using Wired Equivalent Privacy (WEP) security, the WEP key should be:

Exactly 10 or 26 hexadecimal characters. Hexadecimal characters are A–F, a–f, and 0–9.

or

Exactly 5 or 13 ASCII characters. ASCII characters are letters, numbers, punctuation, and symbols found on a
keyboard.

If your wireless access point is using Wi-Fi Protected Access (WPA) security, the WPA passphrase should be:

From 8 to 63 ASCII characters. ASCII characters in a WPA passphrase are case-sensitive.

or

Exactly 64 hexadecimal characters. Hexadecimal characters are A-F, a-f, and 0-9.

If your wireless network is not using security, then you will not have a security key.

Note: If you do not know the SSID of the network that your computer is connected to, launch the wireless utility of
the computer network adapter and look for the network name. If you cannot find the SSID or the security information
for your network, see the documentation that came with the wireless access point, or contact your system support
person.

Networking

81

Advertising