Installing the keyboard – Dell Latitude 100L User Manual

Page 20

Advertising
background image

Keyboard: Dell Latitude 100L Service Manual

file:///C|/Work%20Area%20-%20A/E%20DOC%20Posting/latc100l/en/Service%20Manual/keyboard.htm[2/4/2013 3:01:02 PM]

1 M2 x 3-mm screws (4)

4270E

2 keyboard

5X932

3 keyboard connector

4 interface connector

NOTICE:

The keycaps on the keyboard are fragile, easily dislodged, and time-consuming to replace. Be careful when

removing and handling the keyboard.

5. Lift the top of the keyboard out of the computer base, and pull the keyboard out at an angle (towards the display).

6. Grasp the keyboard flex cable near the connector, and pull up on the flex cable to disconnect it from the interface

connector on the system board.

7. Remove the keyboard from the computer base.

Installing the Keyboard

NOTICE:

To avoid damage to the connector pins, press the keyboard connector evenly into the interface connector on

the system board, and do not reverse the keyboard connector.

1. Connect the keyboard connector of the replacement keyboard to the interface connector on the system board.

Advertising