Replacing fans: dell xps 430 service manual, Replacing fans, Replacing the processor airflow shroud assembly – Dell XPS 430 (Mid 2008) User Manual
Page 26
Replacing Fans: Dell XPS 430 Service Manual
fans.htm[4/15/2014 11:28:31 AM]
Replacing Fans
Dell™ XPS™ 430 Service Manual
Replacing the Processor Airflow Shroud Assembly
Replacing the Processor Fan Cage
CAUTION:
Before working inside your computer, read the safety information that shipped with your
computer. For additional safety best practices information, see the Regulatory Compliance Homepage at
www.dell.com/regulatory_compliance.
CAUTION:
To guard against likelihood of electric shock, laceration by moving fan blades or other
unexpected injuries, always unplug your computer from the electrical outlet before removing the cover.
Replacing the Processor Airflow Shroud Assembly
.
2. Remove the computer cover (see
CAUTION:
The processor heat sink can get very hot during normal operation. Be sure that the heat sink has
had sufficient time to cool before you touch it.
1
processor airflow shroud
2
captive screws (2)
NOTICE:
The processor heat sink is attached to the processor airflow shroud. When you remove the airflow shroud, lay
it upside down or on its side to avoid damaging the heat sink thermal interface.
3. Loosen the two captive screws securing the processor airflow shroud to the chassis, then pivot the shroud forward and
ease it out of the hinges.