Dell XPS 430 (Mid 2008) - Manual (Page 50)

System Setup: Dell XPS 430 Service Manual
setup.htm[4/15/2014 11:28:36 AM]
Maintenance
Service Tag
Displays the system service tag.
SERR Message
(On default)
Controls the SERR message mechanism.
Some graphics cards require that the
SERR Message mechanism be disabled.
Off — Do not use the SERR
message mechanism.
On — Use the SERR message
mechanism.
Load Defaults This setting restores the computer's
factory-installed default settings.
Cancel — Do not restore factory-
installed default settings.
Continue — Restore factory-
installed default settings.
Event Log Displays the system event log.
Mark all entries — Mark all event
log entries as read (R).
Clear log — Clear all event log
entries.
NOTE: Once an event log entry is marked
as read (R) that entry cannot be marked
as unread (U).
POST Behavior
Fastboot
(On default)
Enables or disables the option to speed up
the boot process by skipping certain
configurations and tests.
Off — Do not skip any steps in the
boot process.
On — Boot quickly.
Numlock Key
(On default)
Enables or disables the numerical and
mathematical features of the rightmost
bank of keys on the keyboard.
Off — Right keypad keys function
as arrows.
On — Right keypad keys function
as numbers.
POST Hotkeys
(Setup & Boot Menu default)
Specifies the function keys to display on
the screen when the computer starts.
Setup & Boot Menu — Display
both messages (F2=Setup and
F12=Boot Menu).
Setup — Display the setup
message only (F2=Setup).
Boot Menu — Display the
Quickboot message only
(F12=Boot Menu).
None — Neither message is
displayed.