Dell XPS 430 (Mid 2008) - Manual (Page 33)

Replacing the Front I/O Panel: Dell XPS 430 Service Manual
iopanel.htm[4/15/2014 11:28:32 AM]
10. To replace the front I/O panel, align the screw holes on the I/O panel with the screw holes on the chassis, and replace
the two screws.
11. Reconnect the cable that attaches the power button to the I/O panel.
12. Reconnect the 1394 cable, and audio cable (if it exists and you had removed it).
13. Reconnect the control-panel cable to the I/O panel connector.
14. Replace the front bezel:
a. Align the six tabs with the corresponding slots on the front panel and snap it back into place.
b. Replace the two screws that secure the bezel to the bottom of the chassis.
c. Replace the drive panel (see Replacing the Drive Panel ).
15. Replace the processor airflow shroud (see Replacing the Processor Airflow Shroud Assembly ) and the processor fan
assembly (see Replacing the Processor Fan Cage and Replacing the Processor Fan ).
16. Connect the card fan assembly (see Replacing the Card Fan )to the system board.
17. Replace the computer cover (see Replacing the Computer Cover ).
Back to Contents Page