Dell UPS 1920T - Manual (Page 55)

55 Configuring the Card |
Access Control
Click Access Control from the menu bar to configure the different parameters to allow secure access to
the card using a browser or SNMP.
NOTE: If you are not already logged on, you will be prompted to enter your user name and password before
accessing this page.
NOTE: Restart the card to activate any configuration changes.
Figure 35. Access Control Page
Configurable access control settings are:
S
Enter New Manager User Name: This text field (limited to ten characters) enables secure access
and modification of pages. Default value is admin.
S
Enter New Password: This text field (limited to ten characters) enables secure access to
Configuration menu pages. Default value is admin.
S
Confirm New Password: Re-enter the new password.
S
SNMP: This option allows enabling or disabling SNMP communication. Default value is Disabled.
S
Current Community Read-Only name is: Displays the current the SNMP community name used
for read operations.
S
Change Community Read-Only: This text field (limited to 49 characters) enables the SNMP
community name used for read operations to be changed.