Dell UPS 1920T - Manual (Page 59)

59 MIB Objects |
MIB Objects
This chapter describes the Management Information Base (MIB) files available with the card. A MIB is
an information repository residing on a device in a communication network. Network management
software uses a device's MIB to manage the device. Every manageable device on a network has a MIB
consisting of one or more files that list information about the device.
Use the facilities provided by your Simple Network Management Protocol (SNMP) management
software to access the individual MIB objects. The objects define the information available about your
UPS.
You can configure a device so that it generates a trap if a certain condition occurs, such as an alarm
clearing. The trap is sent to the management station to inform it of the occurrence.
This chapter contains an overview of MIB definitions for each of the MIB files:
S
IETF UPS MIB
S
Dell UPS MIB
S
RFC 1213 UPS MIB II
IETF UPS MIB
Table 11 lists IETF UPS MIB objects. The MIB OID (object identifier) is 1.3.6.1.2.33. All variables are
in read-only mode.
Table 11. IETF UPS MIB Objects
Variable Name and Relative XML Object Path OID Variable Type Variable Unit
upsIdentManufacturer
UPS.PowerSummary.iManufacturer
1.1.1 Display String —
upsIdentModel
UPS.PowerSummary.iModel
1.1.2 Display String —
upsIdentUPSSoftwareVersion
UPS.PowerSummary.iVersion
1.1.3 Display String —
upsIdentAgentSoftwareVersion
No Relative XML Object Path
1.1.4 Display String —
upsBatteryStatus
UPS.PowerSummary.PresentStatus.BelowRemainingCapacityLimit
1.2.1 Integer —
upsSecondsOnBattery
UPS.PowerSummary.PresentStatus.Discharging
1.2.2 Integer Sec
4