Dell 5530/dn Mono Laser Printer - Manual (Page 149)

• Network <x>, <y> indicates a network interface is the active communication link, where <x>, <y> indicates
the active interface is connected to the printer through channel y on PCI connector x. If x equals 0, then the
standard network interface is active.
Note: The current interface displays on the menus settings page.
Wait for the message to clear.
No held jobs
Wait for the message to clear.
No jobs found
The PIN you entered is not associated with any confidential print job.
Try one or more of the following:
• Press the arrow buttons until Try again appears, and then press to enter another PIN.
• Press the arrow buttons until Cancel appears, and then press to exit.
No jobs to cancel
Wait for the message to clear.
Not Ready
The printer is not ready to receive or process data, or the printer ports are offline.
No recognized file types
Either there are no files saved on the flash drive, or the files saved are not supported. Convert files to any of the
following supported file types: .pdf, .gif, .jpeg, .jpg, .bmp, .png, .tiff, .tif, .pcx, or .dcx.
Overflow bin full
Remove the stack of paper from the bin to clear the message.
Parallel/Parallel <x>
The printer is using a parallel cable connection. The parallel port is the active communication link.
[PJL RDYMSG]
This is the Printer Job Language (PJL) Ready message. It appears after the Ready or Power Saver message. If the
message string is too long, it is truncated.
Wait for the message to clear.
Understanding printer messages
149