Dell 5530/dn Mono Laser Printer - Manual (Page 192)

This symbol identifies static-sensitive parts. Do not touch in the areas near these symbols without first touching the
metal frame of the printer.
Laser notice
The printer is certified in the U.S. to conform to the requirements of DHHS 21 CFR Subchapter J for Class I (1) laser
products, and elsewhere is certified as a Class I laser product conforming to the requirements of IEC 60825-1.
Class I laser products are not considered to be hazardous. The printer contains internally a Class IIIb (3b) laser that is
nominally a 7 milliwatt gallium arsenide laser operating in the wavelength of 655-675 nanometers. The laser system
and printer are designed so there is never any human access to laser radiation above a Class I level during normal
operation, user maintenance, or prescribed service condition.
Laser advisory label
A laser notice label may be affixed to this printer as shown:
Power consumption
Product power consumption
The following table documents the power consumption characteristics of the product.
Note: Some modes may not apply to your product.
Mode Description Power consumption (Watts)
Printing The product is generating hard-copy output from
electronic inputs.
640 W (simplex), 540 W (duplex); 725 W (simplex), 565
W (duplex); 740 W (simplex), 575 W (duplex)
Copying The product is generating hard-copy output from
hard-copy original documents.
N/A
Scanning The product is scanning hard-copy documents. N/A
Ready The product is waiting for a print job. 80 W; 85 W; 85 W
Power Saver The product is in energy-saving mode. 12 W; 13 W; 14 W
Notices
192