Dell PowerVault 775N (Rackmount NAS Appliance) - Manual (Page 14)

The following options and information fields appear on the main System Setup screen:
System Time — Resets the time on the system's internal clock.
System Date — Resets the date on the system's internal calendar.
Diskette Drive A: — Displays the type of diskette drive for your system.
System Memory — Displays the amount of system memory. This option has no user-selectable settings.
Memory Interleaving — Displays memory interleaving information for the system. This option has no user-selectable
settings.
Video Memory — Displays the amount of video memory. This option has no user-selectable settings.
Redundant Memory — Displays an option that allows you to enable or disable the redundant memory feature. All
banks should have memory modules of the same type and size for this feature to function properly.
OS Install Mode — Determines the maximum amount of memory available to the operating system. On sets the
maximum memory available to the operating system to 256 MB. Off (default) makes all of the system memory
available to the operating system. Some operating systems will not install if the system has more than 2 GB of system
memory. Turn this option to On during operating system installation and Off after installation.
CPU Information — Displays information related to the microprocessor bus and microprocessors. This screen has no
user-selectable settings.
Boot Sequence — Displays the Boot Sequence screen.
Hard-Disk Drive Sequence — Displays the Hard-Disk Drive Sequence screen.
Integrated Devices — Displays the Integrated Devices screen.
PCI IRQ Assignment — Displays a screen that allows you to change the IRQ allocated to each of the integrated
devices on the PCI bus, and any installed expansion cards that require an IRQ.
PCIX Slot Information — Displays a menu that contains information about each of the system's PCI-X slots.