Dell PowerVault 775N (Rackmount NAS Appliance) User Manual
Page 4
Additional indicators for system power and drives are located behind the bezel. The front-panel status LCD provides
information by using an alphanumeric character display (see "
").
shows the front-panel features of the system.
describes the front-panel features.
Figure 1-2. Front-Panel Features
Table 1-3. Front-Panel Features
Component
Description
Power button
Turns system power off and on.
If you turn off the system using the power button, the system can perform an orderly shutdown before
power is turned off.
The button is enabled in the System Setup program. When disabled, the button can only turn system
power on.
Power
indicators
Provide information on power status (see "
").
CD and
diskette drive
indicators
Indicate read or write access to the respective drive.
Hard-drive
indicators
Provide information on the status of the respective hard drive (see "
NIC indicators
Indicate whether the NIC has a valid link to the network (see "
").
Status LCD
Signifies when the system is operating correctly or when the system needs attention (see "
System
identification
button
Identifies a particular system (see "
System Identification Indicators
").
NMI button
Troubleshoots software and device driver errors when using certain operating systems. You can press this
button by using the end of a paper clip. The NMI option is enabled in the System Setup program.
NOTICE:
Use the NMI button only if directed to do so by qualified support personnel or by the
operating system's documentation. Pressing this button halts the operating system and displays a
diagnostic screen.