Hard-disk drive sequence screen, Integrated devices screen – Dell PowerVault 775N (Rackmount NAS Appliance) User Manual
Page 15
Console Redirection — Displays a screen that allows you to configure console redirection. The sub-menu allows you
to turn the feature on or off, select the remote terminal type, and enable or disable redirection after booting. For more
information on using console redirection, see Appendix C, "
Embedded Server Management — Displays a menu of three selectable fields: Front-Bezel Chassis Intrusion,
Front-Panel LCD Options, and User-Defined LCD String fields.
Front-Bezel Chassis Intrusion — Selecting this field allows you to enable or disable the chassis-intrusion
detection feature.
Front-Panel LCD Options — Selecting this field allows you to select whether you display the service tag, asset
tag, or a user-defined string in the front-panel display.
User-Defined LCD String — Selecting this field allows you to enter the user-defined string to be displayed in
the front panel. Line 1 is five characters long, and line 2 is 16 characters long.
System Security — Displays a screen that allows you to configure the system password and setup password features.
See "
Using the System Password Feature
" and "
Using the Setup Password Feature
" for more information.
Keyboard NumLock — Determines whether your system starts up with the NumLock mode activated on 101- or 102-
key keyboards (does not apply to 84-key keyboards).
Report Keyboard Errors — Enables or disables reporting of keyboard errors during the POST. This option is useful
when applied to self-starting or host systems that have no permanently attached keyboard. In these situations,
selecting Do Not Report suppresses all error messages relating to the keyboard or keyboard controller during POST.
This setting does not affect the operation of the keyboard itself if a keyboard is attached to the system.
Asset Tag — Displays the customer-programmable asset tag number for the system if an asset tag number has been
assigned. You can enter an asset tag number of up to 10 characters into NVRAM.
See "
" for information on creating an asset tag utility diskette and assigning and deleting an
asset tag number.
See your Resource CD for additional information on the asset tag utility.
The Boot Sequence screen options determine the order in which the system looks for boot devices that it needs to load
during system startup. Available options include the diskette drive, CD drive, network, and hard drives. You can enable or
disable a device by selecting it and pressing the spacebar. To change the order in which devices are searched, use the <+>
and <–> keys.
Hard-Disk Drive Sequence Screen
The Hard-Disk Drive Sequence screen options determine the order in which the system searches the hard drives for the
files that it needs to load during system startup. The choices
depend on the particular hard drives installed in your system. To change the order in which devices are searched, use the
<+> and <–> keys. Press <Enter> to confirm your selection.
NOTICE:
Although you can change the device search order in the Hard-Disk Drive Sequence screen and select the
boot drive, Dell recommends that you do not change the default order in the Hard-Disk Drive Sequence screen.
Integrated Devices Screen
This screen is used to configure the following devices:
Embedded RAID controller — Both channels A and B have the same settings. The configurable options will vary,
depending on the type of ROMB card installed in your system.
The ROMB card is set to RAID Enabled by default for RAID functionality. Do not turn off RAID functionality.
NOTICE:
If you disable RAID functionality on your system, all data will be lost.