Dell PowerVault 775N (Rackmount NAS Appliance) - Manual (Page 3)

Table 1-1. Bezel System Status Indicator Codes
Status
Indicator
Caution
Indicator
Indicator Code
Off Off No power is available to the system, or the system is not powered on.
On Off The system is operating normally.
Off Blinking The system has detected an error and requires attention.
Blinking Off The system is identifying itself.
Blinking Blinking or
Off
Systems management software causes the status indicator to blink to identify a particular
system.
Table 1-2. Back-Panel System Status Indicator Codes
Indicator Indicator Code
Off No power is available to the system, or the system is not powered on.
Blue The system is operating normally.
Amber blinking The system has detected an error and requires attention.
Blue blinking The system is identifying itself.
NOTE: Server management software causes the indicator to blink to identify a particular system.
System Identification Indicators
You can use identification buttons on the front and back panels to locate a particular system within a rack. When you press
either of these buttons, the identification indicator on the back panel and status indicator on the front bezel blink until you
press one of the buttons again. If the bezel is removed, the LCD display blinks blue.
See Figure 1-2 to locate the front-panel system identification button. See " Back-Panel Features " to locate the back-panel
system identification button and indicator.
Front-Panel Features