Dell PowerEdge C6220 - Manual (Page 73)

73
FILE LOCATION: D:\Projects\User Guide\Server\Dell\OOB\HOM\C8220-C8220X
BMC\BMC\C8220-C8220X_BMC_HOM_section1.fm
Table 1-58. Configuration ID = 10h, Firmware Update
Attribute ID Size Description R/W
Remote Update
Enable
1 1 Allow firmware update via HTTP/FTP/TFTP
server.
• 0h: Disable
• 1h: Enable (default)
R/W
Protocol 2 1 Specified supported protocols.
• [7:3] - Reserved
• [2] - HTTP
• [1] - FTP
• [0] - TFTP
Default value is 07h.
R
URI 3 1..
256
The URI of the image file. R/W
Connection
Retry
4 1 Specify the number of retries for connecting to
HTTP/FTP/TFTP server. A 0 value specifies that
the BMC will not attempt to retry to connect to
the TFTP server. Default value is 01h.
R/W
Retry Interval 5 1 Define the retry interval in 5 seconds increments.
Default value is 01h.
R/W
Delay Time 6 1 Define the delay time for connecting to TFTP
server. The time is specified in seconds.
• 00h: BMC connects to TFTP server
immediately. (default)
• FFh: Random between 5 and 10 seconds.
R/W