Dell 6 GBps SAS HBA - Manual (Page 14)

14 Hardware Installation
When adding a 6 Gbps SAS HBA or Internal Tape Adapter, remove the
blank filler bracket on the back of the system aligned with the PCI-e slot
you have selected.
NOTE: For more information about your system’s PCI-e slots, see your
system’s Hardware Owner’s Manual.
5 Align the controller with the PCI-e slot you have selected.
6 Insert the controller in the PCI-e slot. See Figure 3-1.
NOTE: Figure 3-1 displays the 6 Gbps SAS HBA, but the installation instructions
in this section are common for the 6 Gbps SAS HBA and Internal Tape Adapter.
Figure 3-1. Installing a 6 Gbps SAS HBA
1 bracket screw 2 6 Gbps SAS HBA
3 PCI-e slot
1
2
3