Dell 6 GBps SAS HBA User Manual
Page 33
Troubleshooting
33
• Message: MPT BIOS Fault xxh encountered at adapter
PCI (xxh, xxh, xxh)
Description:
–
Fault 01: No I/O port assigned to the adapter.
–
Fault 02: A MPT firmware fault occurred.
–
Fault 03: No image for firmware download boot.
–
Fault 04: Firmware download boot checksum error.
–
Fault 05: IOC hardware error.
–
Fault 06: MPT firmware communication error.
–
Fault 07: PCI bus master error.
–
Fault 08: String image (messages) not found.
–
Fault 09: String memory allocation failed.
–
Fault 0A: String upload failed.
–
Fault 0B: String image was invalid.
–
Fault 0C: Unsupported IOC configuration.
–
Fault 0D: Time out waiting for IOC to reply.
–
Fault 0E: Transmit doorbell handshake error.
–
Fault 0F: Receive doorbell handshake error.
–
Fault 10: No memory mapped I/O address assigned.
–
Fault 11: IOC facts failure.
–
Fault 12: IOC initialization failure.
–
Fault 13: Port enable failure.
•
Message: MPT BIOS Fault xxh encountered at adapter
PCI (xxh, xxh, xxh)
Description: When xxh is 02 or 11, a 4-digit hexadecimal fault value may
be displayed with this message. Ensure that you make a note of this value
and contact technical support for assistance.
•
Message: One or more unsupported device detected!
Description: There is a topology error during device scan.