Dell 6 GBps SAS HBA - Manual (Page 30)

30 Troubleshooting
• Message: Error obtaining PHY properties
configuration information.
Description: Fails to read vital configuration page from firmware.
Suggested Solution: Reflash the firmware and reboot.
• Message: Configuration Utility Options Image
checksum error.
Description: Fails to read Configuration Utility options from flash.
Suggested Solution: Restart and retry. If the issue persists, reflash the
firmware on the controller.
• Message: Can't load default Configuration
Utility options.
Description: Memory allocation for Configuration Utility options
structure fails.
• Message: An error occurred while writing
non-volatile settings.
Description: An error occurs while writing one or more settings to the
firmware.