Dell SE178WFP Monitor - Manual (Page 12)

Accessing the Menu System
1. With the menu off, press the MENU button to open the OSD system and display the main features menu.
2. Press the - and + buttons to move between the function icons. As you move from one icon to another, the function name is highlighted to reflect the
function or group of functions (sub-menus) represented by that icon. See the table below for a complete list of all the functions available for the monitor.
3. Press the MENU button once to activate the highlighted function. Press -/+ to select the desired parameter, press menu to enter the slidebar
then use the - and + buttons, according to the indicators on the menu, to make your changes.
4. Press the MENU button once to return to the main menu to select another function or press the MENU button two or three times to exit from the OSD.
A Function icons B Main Menu C Menu icon
D Sub-Menu name E Resolution
Icon Menu Name
and Sub-
menus Description
EXIT This is used to exit out of the Main Menu.
Positioning:
Horizontal
Vertical
'Positioning' moves the viewing area around on the monitor screen.
When making changes to either the Horizontal or Vertical settings, no changes occur to the size of the viewing area; the image gets
shifted based on what you select.
Minimum is '0' (-). Maximum is '100' (+).
Image
settings:
Auto Adjust Even though your computer system can recognize your new flat panel monitor on startup, the 'Auto Adjustment' function will optimize
the display settings for use with your particular setup.
NOTE: In most cases, 'Auto Adjust' produces the best image for your configuration; you can directly access this function via Auto
Adjustment hotkey.