Dell SE178WFP Monitor - Manual (Page 17)

Soundbar Attachment to the Monitor
Back to Contents Page
1. Power/Volume control
2. Power indicator
3. Headphone connectors
1. Working from the rear of the monitor, attach the Soundbar aligning the two slots with the two tabs along the bottom rear of the monitor.
2. Slide the Soundbar to the left until it snaps into place.
3. Connect the Soundbar with the power brick.
4. Plug the power cable of the power brick into a nearby outlet.
5. Insert the lime-green mini stereo plug from the rear of the Soundbar into the computer's audio output jack.
NOTICE: Do not use with any device other than Dell Soundbar.
NOTE: Soundbar Power Connector - 12V DC output is for optional Dell Soundbar only.