Dell SE178WFP Monitor - Manual (Page 6)

Power Management Modes
Video input signals Analog RGB: 0.7 Volts +/-5%, 75 ohm input impedance
Synchronization input signals D-sub: Detachable, Analog, 15pin, shipped attached to the monitor
AC input voltage / frequency / current 100 to 240 VAC / 50-60 Hz / 0.6A (100V)& 0.35A(240V)Max.
Inrush current 120V: 30A (Max.)
240V: 60A (Max.)
Physical Characteristics
The following table lists the physical characteristics:
Signal cable type D-sub: Detachable, Analog, 15pin, blue connector, attached to the
monitor
Dimensions (with stand):
Height
339.2 mm (13.35 inches)
Width
403.2 mm (15.87 inches)
Depth
126.2 mm (4.97 inches)
Weight:
Monitor (Stand and Head)
3.86 kg ( 8.49 lb)
Monitor Flat panel only (VESA Mode)
2.70 kg (5.95 lb)
Weight with packaging
5.31 kg (11.68 lb )
Environmental
The following table lists the environmental limitation:
Temperature:
Operating
5° to 35 °C (41° to 95 °F)
Nonoperating
Storage: 0° to 60 °C (32° to 140 °F)
Shipping: -20° to 60 °C (-4° to 140 °F)
Humidity:
Operating
10% to 80% (noncondensing)
Nonoperating
5% to 90% (noncondensing)
Altitude:
Operating
3,657.6 m (12,000 ft) max
Nonoperating 12,192 m ( 40,000 ft ) max
Thermal dissipation 256.08 BTU/hour (maximum)
119.5 BTU/hour (typical)