Dell SE178WFP Monitor - Manual (Page 13)

Pixel Clock The Phase and Pixel Clock adjustments allow you to more closely adjust your monitor to your preference. Select Image Settings in
the main OSD to access these settings.
Use the - and + buttons to adjust interference. Minimum: 0 ~ Maximum: 100
Phase If satisfactory results are not obtained using the Phase adjustment, use the Pixel Clock adjustment and then use Phase again.
NOTE: This function may change the width of the display image. Use the 'Horizontal' function of the 'Position' menu to center the
display image on the screen.
Color
Settings:
Adjusts the color temperature and saturation.
Color Settings adjust the color temperature.
Color Settings has the following options: Color Management :
Color Settings Mode : You can choose between a Graphics and a Video mode. If your computer is connected to your monitor, choose
Video.
Color Presets: You can choose different color presets for different viewing modes.
As soon as choose Graphics,you can choose Normal Preset, Red Preset,Blue Preset or User Preset.
Select Red Preset for a warm color.
Select Blue Preset for a cool color.
You can adjust the monitor color using User Preset, R, G, B.Normal Preset mean color temperature 6500K.
Select Blue Preset for a bluish tint. This color setting is used for text based applications (spreadsheets, programming, text editors,
etc.).
Select Red Preset for a reddish tint.This color setting is used for color-intensive applications (photograph image editing, multimedia,
movies, etc.).
Select Normal Preset for default color settings. This setting is also the “sRGB” standard default color space.
User Preset: Use the plus and minus buttons to increase or decrease each of the three colors (R, G, B) independently, in single digit
increments, from 0 to 100.