Dell 4320 Projector - Manual (Page 31)

Using the Control Panel
1 LAMP warning light If the LAMP amber indicator is on or blinking,
one of the following problems could be occurring:
• Lamp is reaching its end of usable life
• Lamp module is not properly installed
• Lamp driver failure
• Color wheel failure
For more information, see "Troubleshooting Your
Projector" on page 101 and "Guiding Signals" on
page 105.
2 TEMP warning light If the TEMP amber indicator is on or blinking,
one of the following problems could be occurring:
• Internal temperature of the projector is too
high
• Color wheel failure
For more information, see "Troubleshooting Your
Projector" on page 101 and "Guiding Signals" on
page 105.
3 Power Turns the projector on or off. For more
information, see "Turning Your Projector On" on
page 24 and "Turning Your Projector Off" on
page 24.
Using Your Projector 31