Dell 4320 Projector - Manual (Page 50)

Reset items include both computer sources and Video source settings.
LAN S
ETTINGS
— Select and press to activate LAN settings. The LAN settings
menu provides the following options:
WIRELESS AND LAN— Select Enabled to active the Wireless and LAN
function.
DHCP— If a DHCP server exists in the network to which the projector is
connected, the IP address will automatically be acquired when you select
DHCP On. If DHCP is Off, manually set the IP Address, Subnet Mask,
and Gateway. Use and to select the number of IP address, Subnet
Mask, and Gateway. Key in enter to confirm each number and then use
and to set the next item.
IP A
DDRESS
— Automatically or manually assigns the IP address to the
projector connected to the network.
S UBNET M ASK — Configure the Subnet Mask of the network connection.
G ATEWAY — Check the Gateway address with your network/system
administrator if you configure it manually.
DNS— Check the DNS Server IP address with your network/system
administrator if you configure it manually.
S TORE — Press
to save the changes made in network configuration
settings.
NOTE:
1. Use and buttons to select IP Address, Subnet Mask,
Gateway, DNS, and Store.
2. Press the button to enter IP Address, Subnet Mask, Gateway, or
DNS to set the value. (The selected option is highlighted in blue)
a Use and buttons to select the option.
b Use
and buttons to set the value.
Using Your Projector 50