Dell Dimension 2300 User Manual
Page 77
Advertising
Adding Parts
77
7
Reach inside the computer and push the metal plate towards you so
that it snaps off of the computer or insert a small screwdriver inside
one of the holes on the front of the metal plate and pry it towards you
until it snaps off.
8
Ensure that the jumper setting on the new drive is set for "cable select"
(see the documentation that came with the drive for information).
9
Remove two of the extra alignment screws from the front of the
computer and insert them into the drive.
metal plate
drive
drive
alignment screws (2)
Advertising