Dell Inspiron 1318 (Mid 2008) - Manual (Page 24)

Replacing the Hard Drive
1. Remove the new drive from its packaging.
2. Place the hard drive in the bracket and replace the two M2 x 3-mm screws on either side.
3. Slide the hard drive into the bay.
4. Replace the four M3 x 3-mm screws on the hard drive.
5. Slide the battery into the battery bay, until it clicks into place.
6. Install the operating system for your computer, as needed (see "Restoring Your Operating System" in your Setup Guide).
7. Install the drivers and utilities for your computer, as needed (see "Reinstalling Drivers and Utilities" in your Setup Guide).
Back to Contents Page
NOTE: Save the original packaging for storing or shipping the hard drive.