Dell Inspiron 1318 (Mid 2008) - Manual (Page 36)

10. Starting at the top of the palm rest, use your fingers to separate the palm rest from the computer base by lifting the inside of the palm rest while
pushing in on the outside.
Replacing the Palm Rest
1. Align the palm rest with the computer base and gently snap it into place.
2. Connect the touch pad cable to the connector on the system board and push the black tab towards the connector.
3. Replace the seven screws on the top of the palm rest.
4. Turn the computer over and replace the six screws in the computer base.
5. Replace the display assembly (see Display ).
6. Replace the internal card with Bluetooth® wireless technology (see Internal Card With Bluetooth® Wireless Technology ).
7. Replace the card in the ExpressCard slot.
8. Replace the WLAN card (see WLAN Card ).
1 palm rest 2 M2.5 x 2-mm screws (3) and M2 x 3-mm screws (4)
3 touch pad cable
NOTICE: Carefully separate the palm rest from the computer base to avoid damage to the palm rest.