Dell Dimension 2100 User Manual

Page 3

Advertising
background image

POST Beep Codes

If the monitor cannot display errors or problems, during power-on self-test (POST) the computer may emit a series of beeps, or beep code, that
identifies the problem.

If the computer emits a beep code and then fails to start, write down the beep code and look it up in Table 2.

Table 2. System Beep Codes

Microprocessor has failed a BIOS
test.

If the problem persists, see  
"Contacting Dell" in the Solutions
Guide
for instructions on obtaining
technical assistance.

Memory failed to be sized or
enabled.

Reseat the

memory modules

. If the

problem persists, remove all but one
memory module, and then restart the
computer. Repeat this step until the
malfunctioning memory module is
identified.

PCI bus failure has occurred.

Remove all

cards

and restart the

computer to determine if a resource
conflict exists. If a conflict exists,

resolve the conflict

If the problem persists, see  
"Contacting Dell" in the Solutions
Guide
for instructions on obtaining
technical assistance.

Video controller failed to initialize or
respond.

If the problem persists, see  
"Contacting Dell" in the Solutions
Guide
for instructions on obtaining
technical assistance.

IDE bus failure has occurred.

Reseat the IDE cables. If the problem
persists, see  "Contacting Dell" in the 
Solutions Guide for instructions on
obtaining technical assistance.

USB port or a device connected to it
has failed initialization.

Disconnect the device from the

USB

port

. If the problem persists, see  

"Contacting Dell" in the Solutions
Guide
for instructions on obtaining
technical assistance.

Other failure.

S

ee  "Contacting Dell" in the 

Solutions Guide for instructions on
obtaining technical assistance.

Computer has started and turned
over control to the operating system.

No action is necessary.

Beep
Code

Possible Cause

Corrective Action

1

Memory refresh failure

Reseat the memory modules

.  

2

Parity cannot be reset

Reseat the memory modules

.

3

Memory failure within the first 64
KB of memory

Reseat the memory modules

.

4

Timer not operational

See  "Contacting Dell" in the Solutions Guide for instructions on
obtaining technical assistance.

5

Processor failure

See  "Contacting Dell" in the Solutions Guide for instructions on
obtaining technical assistance.

6

8442 keyboard controller error

See  "Contacting Dell" in the Solutions Guide for instructions on

Advertising