Dell Dimension 2100 - Manual (Page 37)

Table 10. Security Screen Options
Boot Screen
Table 11. Boot Screen Options
Option Function
Supervisor Password Is Indicates whether a supervisor password has been assigned.
User Password Is Indicates whether a user password has been assigned.
Set Supervisor Password Sets and confirms a supervisor password.
Set User Password Sets and confirms a user password.
Clear User Password Clears the user password. Settings for this option are Yes or No (default).
Option Function
Quiet Boot Enabled (default) displays the Dell logo. Disabled displays the normal POST messages.
Quick Boot When set to Enabled, this option shortens the POST by eliminating some tests. If set to Disabled (default), all POST tests
occur.
Restore on AC/
Power Loss Determines what state the computer enters when AC power is restored after a power loss. Settings are as follows:
l Last State (default) — Computer returns to the state it was in when power was lost.
l Stays Off — Computer stays off when power is restored; you must press the power button to restore power.
l Power On — Computer starts up when power is restored.
On LAN This option controls how the computer responds to a Wakeup On LAN event. The settings for this option are Power On or
Stays Off.
On PME This option controls how the computer responds to a PCI power management enabled (PME) wakeup event. The settings for