Dell Latitude C800 - Manual (Page 46)

44 Remo ving and Replacing Parts
w
w
w
.d
e
ll.c
o
m
|
s
u
p
p
o
rt
.d
e
ll.
c
o
m
Replacing the Reserve Battery
1 Seat the reserve battery and press it into place.
2 Connect the reserve battery cable.
3 Place the palmrest bracket loosely in the palmrest, and connect the
palmrest flex cable to the ZIF connector.
4 Replace the two 4-mm screws that secure the palmrest bracket to the
palmrest.
System Board Assembly
NOTICE: Disconnect the computer and attached devices from electrical
outlets and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or
by periodically touching unpainted metal on the computer.
S y s t em Bo a r d S c re w s
4-mm captive-
washer screws (3)
system board assembly
bottom case assembly
20-mm screw
64mcwc11.book Page 44 Tuesday, April 3, 2001 9:58 AM