Dell Latitude C800 - Manual (Page 53)

Removing and Replacing Parts 51
LED Board
NOTICE: Disconnect the computer and attached devices from electrical
outlets and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or
by periodically touching unpainted metal on the computer.
L ED Bo a r d
Removing the LED Board
1 Follow the instructions in “Preparing to Work Inside the Computer .”
2 Remove the hinge cover .
3 Remove the two 4-mm screws.
4 Lift the LED board away from its connector.
4-mm screws (2)
64mcwc11.book Page 51 Tuesday, April 3, 2001 9:58 AM