Dell Dimension 2010 - Manual (Page 22)

22 Memory Module(s)
Replacing Memory Module(s)
1 Follow the procedures in "Before You Begin" on page 11.
2 Press out the securing clip at each end of the memory module connector.
CAUTION: Do not install ECC memory modules.
3 Align the notch on the bottom of the memory module with the tab in the
memory module connector.
CAUTION: To avoid damage to the memory module, press the memory module
straight down into the connector while you apply equal force to each end of the
memory module.
4 Insert the memory module into the memory module connector until the
memory module snaps into position.
If you insert the memory module correctly, the securing clips snap into the
cutouts at each end of the memory module.
1 cutouts (2) 2 tab
3 notch 4 memory module
3
2
1
4
book.book Page 22 Monday, November 19, 2012 11:42 AM