Processor, Removing the processor – Dell Dimension 2010 User Manual
Page 55
Processor
55
11
Processor
WARNING:
Before working inside your computer, read the safety information that
shipped with your computer. For additional safety best practices information, see
the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
WARNING:
To guard against electrical shock, always unplug your computer from
the electrical outlet before removing the cover.
WARNING:
Do not operate your equipment with any cover(s) (including computer
covers, bezels, filler brackets, front-panel inserts, etc.) removed.
Removing the Processor
1 Follow the procedures in "Before You Begin" on page 11.
2 Remove the computer cover (see "Removing the Computer Cover" on
CAUTION:
Despite having a plastic shield, the processor fan and heat sink
assembly may be very hot during normal operation. Be sure that it has had
sufficient time to cool before you touch it.
3 Remove the processor fan and heat sink assembly from the computer (see
"Removing the Processor Fan and Heat Sink Assembly" on page 51).
NOTE:
Unless a new heat sink is required for the new processor, reuse the original
processor fan and heat sink assembly when you replace the processor.
book.book Page 55 Monday, November 19, 2012 11:42 AM