Hinge cover: dell xps m1210 service manual, Hinge cover, Removing the hinge cover – Dell XPS M1210 (MXC062, Mid 2006) User Manual
Page 22
Hinge Cover: Dell XPS M1210 Service Manual
file:///C|/Users/santhosh_v.ASIA-PACIFIC/Desktop/Hawke/New%20folder/hingecvr.htm[2/21/2014 11:14:50 AM]
Hinge Cover
Dell™ XPS™ M1210 Service Manual
Removing the Hinge Cover
CAUTION:
Before you begin the following procedure, follow the safety instructions in the Product
Information Guide.
NOTICE:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching
an unpainted metal surface (such as the back panel) on the computer.
NOTICE:
To help prevent damage to the system board, remove the main battery (see
) before working inside the computer.
NOTICE:
The hinge cover is fragile and can be damaged if extreme force is used. Be careful when removing the hinge
cover.
1. Follow the instructions in
Before Working Inside Your Computer
.
2. Open the display all the way (180 degrees) so that it lies flat against your work surface.
NOTICE:
To avoid damage to the hinge cover, do not lift the cover on both sides simultaneously.
3. Insert a plastic scribe into the indent to the right side of the hinge cover, and gently pry the hinge cover loose.
4. Ease the hinge cover up, moving from right to left, and remove the cover.