Dell XPS M1210 (MXC062, Mid 2006) - Manual (Page 32)

Mini-Cards: Dell XPS M1210 Service Manual
file:///C|/Users/santhosh_v.ASIA-PACIFIC/Desktop/Hawke/New%20folder/cards.htm[2/21/2014 11:14:56 AM]
4. Install the replacement WLAN card:
NOTICE: Do not install a Mobile Broadband card in the WLAN card slot.
a. Insert the WLAN card connector into the system board connector at a 45-degree angle, and then press the other
end of the WLAN card down into the securing tabs until the card clicks into place.
NOTICE: To avoid damage to the WLAN card, never place cables under the card.
NOTE: If you are installing a WLAN card for the first time, you will find a clear-plastic protective sleeve on each
antenna cable connector. Before you connect the antenna cables to the WLAN card, slide the sleeves off of the cable
connectors.
b. Connect the antenna cables to the antenna connectors on the WLAN card by matching the color of the cable to
the color of the triangle beside the connector. Connect the main antenna cable (white) to the antenna connector
with the white triangle. Connect the auxiliary antenna cable (black) to the antenna connector with the black
triangle.
NOTE: Your WLAN card may have two or three antenna connectors, depending on the type of card you ordered. If your
computer has a gray antenna cable, attach it to the connector with the gray triangle, if one is available on your card.