Display, Display assembly, Removing the display assembly – Dell Inspiron 15z (1570, Mid 2009) User Manual
Page 16
Back to Contents Page
Display
Dell™ Inspiron™ 1470/1570 Service Manual
Display Assembly
Removing the Display Assembly
1.
Follow the procedures in
Before You Begin
.
2.
Remove the battery (see
Removing the Battery
).
3.
Remove the module cover (see
Removing the Module Cover
).
4.
Disconnect the antenna cables from the Mini-Card (see
Removing the Mini-Card
).
5.
Remove the two screws on the base of the computer that secure the display assembly to the computer base.
6.
Remove the power button cover (see
Removing the Power Button Cover
).
7.
Remove the keyboard (see
Removing the Keyboard
).
8.
Disconnect the display cable and remove the screw from the system board.
9.
Pull the Mini-Card antenna cables up through the slot in the computer base.
10.
Note the routing of all the cables and remove them from their routing guides.
WARNING:
Before working inside your computer, read the safety information that shipped with your computer. For additional safety best
practices information, see the Regulatory Compliance Homepage at www.dell.com/regulatory_compliance.
CAUTION:
Only a certified service technician should perform repairs on your computer. Damage due to servicing that is not authorized by Dell™
is not covered by your warranty.
CAUTION:
To avoid electrostatic discharge, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal
surface.
CAUTION:
To help prevent damage to the system board, remove the main battery (see
Removing the Battery
) before working inside the
computer.