Dell Inspiron 8100 - Manual (Page 23)

3. Open the display and remove the two screws (marked with a "circle D") that secure the display assembly to the bottom case assembly.
4. With the display in an upright position, lift the display assembly from the bottom case assembly.
Display Assembly Bezel and Panel
Removing the Display Assembly Bezel
1. Follow the instructions in " Preparing to Work Inside the Computer ."
2. Use a scribe to pry loose the four rubber screw covers located across the top of the bezel.
NOTICE: When reconnecting the flex cable, press down on both ends of the connector, not in the middle. Pressing the middle of the connector can
damage fragile components.
NOTICE: Disconnect the computer and attached devices from electrical outlets and remove any installed batteries.
NOTICE: To avoid ESD, ground yourself by using a wrist grounding strap or by periodically touching an unpainted metal surface on the computer.