Changing the printing mode – Dell P513w All In One Photo Printer User Manual
Page 46
3
Press Enter, or click OK.
The printer folder opens.
4
Right-click the printer, and then select Set as Default Printer.
For Macintosh users
1
From the Apple menu, choose System Preferences.
2
Click Print & Fax.
3
Select the printer from the Default Printer pop-up menu, or select the printer and click Make Default, depending
on your operating system.
Changing the printing mode
To conserve ink, you can change the default printing mode for all print jobs to Draft or Quick Print. It uses less ink
and is ideal for printing text-only documents. If you need to print photos or other high-quality documents, then you
can select a different mode from the Print dialog before sending the print job.
To change the default print mode:
For Windows users
1
Click
, or click Start and then click Run.
2
In the Start Search or Run box, type control printers.
3
Press Enter, or click OK.
The printer folder opens.
4
Right-click the printer, and then select Printing Preferences.
5
Select Quick Print as the printing mode.
For Macintosh users
1
With a document open, choose File > Print.
2
From the printer pop-up menu, choose the printer.
3
From the print options pop-up menu, choose Print Settings or Quality & Media, depending on your operating
system.
4
From the Print Quality pop-up menu, choose Draft or Quick Print as the printing mode.
5
From the Presets pop-up menu, choose Save as, and then type a name for your setting configuration.
You must choose this configuration name from the Presets pop-up menu for each print job.
Changing the printing mode for a single print job
For Windows users
1
With a document open, click File > Print.
2
Click Properties, Preferences, Options, or Setup.
Printing
46