Dell Inspiron 8500 - Manual (Page 56)

56 Using Batteries and Module Bay Devices
www
.dell.com | support.dell.com
6 Pull the device out of the module bay.
NOTICE: Insert devices into the module bay before you dock and turn on the
computer.
7 Insert the new device into the bay, and push the device until you feel a
click.
8 Replace the device screw.
9 Turn on the computer.
Removing and Installing Devices While
the Computer Is Running
NOTE: If the device
screw is not installed, you
can remove and install
devices while the
computer is running and
connected to a docking
device (docked).
Your computer ships with an optical drive installed in the module bay.
However, the device screw is not installed in the optical drive but packaged
separately. When you install your device in the module bay, you can install
the device screw.