Dell Latitude CPi A - Manual (Page 40)

32 Dell Latitude CPiA Service Manual
%RWWRP&DVH%UDFNHW
)LJXUH%RWWRP&DVH%UDFNHW5HPRYDO
1. Remove the back cover assembly.
2. Remove the keyboard assembly.
3. Remove the palmrest assembly.
4. Remove the 5-mm screw securing the audio shield and the 5-mm screw
securing the EMI drain wire.
5. Remove the audio board shield.
6. Disconnect the speaker wires from connectors JP1 and JP2 on the audio
board.
The connectors are fragile—do not pull on the speaker wires to disconnect
them.
7. Remove the two 5-mm screws on the left side and one 5-mm screw on the
right side of the bottom case bracket.
8. Insert the end of a small flat-blade screwdriver into the slot in the vertical
support in the center of the bottom case, and disengage the plastic
retaining clip.
9. Lift the bottom case bracket from the computer.
5-mm screws (3)
plastic retaining clip
left speaker wires
right speaker
left speaker
slot