Dell POWEREDGE M1000E - Manual (Page 27)

Dell 8/4Gbps FC SAN Module Hardware User’s Manual 25
53-1001964-01
Removing and replacing the FC SAN Module
3
FIGURE 6 Removing an SFP from a Port
5. Refer to the Hardware Owner’s Manual for the PowerEdge Blade Enclosure to remove and
replace the FC SAN Module from the enclosure.
.
ATTENTION
If you are not replacing the FC SAN Module, use a filler panel to fill the empty slot to maintain proper
air flow. Do not leave the slot empty.
SFP
Bale
3 1
Cable
Release
2
SFP
4