Floppy drive, Removing a floppy drive, Installing a floppy drive – Dell Dimension 4700 User Manual
Page 24
Floppy Drive
1.
Follow the procedures in "
Before You Begin
."
2.
Release and remove the front panel
Removing a Floppy Drive
1.
Disconnect the power and data cables from the back of the floppy drive and from the
system board
.
2.
Remove the floppy drive bracket
from the computer:
a.
Remove the bracket-securing screw for the floppy drive.
b.
Remove the bracket for the floppy drive from the computer.
3.
Remove the floppy drive from the bracket:
a.
Remove all four drive-securing screws (two on each side).
b.
Remove the floppy drive from the bracket.
Installing a Floppy Drive
1.
Remove the floppy drive bracket
from the computer.
CAUTION:
Before you begin any of the procedures in this section, follow the safety instructions located in the Product Information Guide.
CAUTION:
To guard against electrical shock, always unplug your computer from the electrical outlet before opening the cover.
NOTE: